SLA / PERFORM

HIGH STRENGTH. EXCELLENT STIFFNESS. SUPERIOR HEAT TOLERANCE.

PERFORM is an outstanding material that contains ceramic particles. It is the ideal material that combines strength and stiffness with unmatched high heat tolerance, outstanding detail resolution and superior surface quality.
The heat tolerance of parts can be further improved through additional tempering (PERFORM TH) and the properties of the parts made from PERFORM TH resemble those made from termoset.

PERFORM is mainly used in applications exposed to high temperatures, for wind tunnel testing, housings and supports of electrical and electronic devices, electric motor housings, sensor supports and metallisation parts .

With its mechanical and thermal profile and the superior quality of surface finish and detail, the material is also suitable for tooling and injection moulding tool engravings.

The material is available in cream-white colour.

Properties of SLA parts made from PERFORM:

  • superior temperature stability
  • outstanding detail resolution
  • excellent surface quality
  • easy finishing

Physical properties of SLA parts made from PERFORM:

  • tensile modulus: 10,500 N/mm²
  • tensile strength: 68 N/mm²
  • elongation at break: 1,1 %
  • flexural modulus: 10,000 N/mm²
  • heat deflection temperature at 0.45 mPa: 132 °C
  • heat deflection temperature at 1.80 mPa: 82 °C
  • hardness: 94 ShD
  • density: 1.61 g/cm³

Physical properties of SLA parts made from PERFORM TH (tempered PERFORM)

  • tensile modulus: 9,800 N/mm²
  • tensile strength: 80 N/mm²
  • elongation at break: 1,2 %
  • flexural modulus: 9,030 N/mm²
  • heat deflection temperature at 0.45 mPa: 268 °C
  • heat deflection temperature at 1.80 mPa: 119 °C
  • hardness: 93 ShD
  • density: 1.61 g/cm³

Files:

Material Data Sheet PERFORM (EN)